D/A Conversion and Analog Output |
D/A conversion section |
digit |
BCD 3-digit (000 to 999) |
digit selection |
by digit selection switch, measured data, upper, middle or lower 3 digits of BCD 5-digit |
conversion time |
40 μs or less |
linearity error |
within ±0.1% of full scale |
Analog output section (voltage) |
voltage range |
0 to 10V (corresponded to 3-digit of 000 to ±999) |
voltage adjustable range |
FULL : ±5% of full scale ZERO : ±0.5% of full scale |
load resistance |
1 kΩ or more |
protective circuit |
short protective circuit included |
Analog output section (current) |
current range |
0 to ±16mA (corresponded to 3-digit of 000 to ±999) 4 to 20mA (option) |
current adjustable range |
FULL : ±5% of full scale ZERO : ±0.5% of full scale |
load resistance |
250 Ωor less |
protective circuit |
short protective circuit included |
Signal I/O |
BCD (polarity signal input) |
signal |
Positive logic pulse polarity is "-" (negative) when high level. |
voltage signal |
Hi: +3.4 to +5.5 V Lo: 0 to 0.8V |
non-voltage signal |
open voltage : approx. 5V short-circuit current : approx. 6mA |
BCD (memory command input) |
signal |
Negative logic pulse |
operation edge |
Trailing edge |
pulse width |
10 μs or more |
voltage signal |
Hi: +3.4 to +5.5 V Lo: 0 to 0.8V |
non-voltage signal |
open voltage : approx. 5V short-circuit current : approx. 6mA |
BCD (HOLD, RESET output) |
signal |
Negative logic voltage output |
pulse width |
Depending on external command input |
voltage signal |
Level "0" : 0 to +1.4 V Level "1" : +3 to +5.5V |
External command input |
signal |
External contact input |
pulse width |
4ms or more |
open voltage |
approx. 5V |
short-circuit current |
approx. 1.2mA |
contact resistance |
max. 100 Ω or less |
General |
Power Supply |
100 to 240VAC (50/60 Hz), 16 VA or below |
Operating temp range |
0 to +40°C |
Outer dimensions |
48 (W) x 96 (H) x 140 (D) mm |
Weight |
approx 600 kg |